Rather than using an Extension # e88YR you might consider using a extended ball mount. We have a couple different lengths depending on how much distance you will need to your Dolly # DM9713093. The distances listed below are from the center of the hitch pin to the center of the hole for mounting a hitch ball.
15-3/4" Ball Mount # 80232
13" Ball Mount # C45270
11" Ball Mount # 40345
If you can provide me with some more information about the length you need and what size ball your dolly... view full answer...
I recommend using the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets # RM82RR on your 2022 Newmar Bay Star 3226. This custom mounting bracket is specific Ford F-53 V8 22,000LB GVWR chassis. The Exact Center included is their heavier duty stabilizer providing you with the best steering feel.
I find installing the SumoSprings Front # SSF-170-40-2 and Rear # SSR-187-54-1 with the steering stabilizer will greatly increase your comfort level while driving. These help to absorb... view full answer...
You can easily determine if you'll need the # RM-590050-10 Extended U-bolt kit by taking a quick measurement. Measure the length of the existing U-bolt that extends through the factory nut. If you can add a 1/2 inch to account for the thickness of the plate used to attach the new anti-sway bar and have 3 threads remaining, you won't need the kit. Otherwise, you will.
Since you currently have a 1/2 inch of thread exposed, I'm afraid you're going to come up short on the U-bolt length and... view full answer...
The only solution I have is for a complete replacement system. Unfortunately, the Atwood Leveleg system was discontinued so there is not a replacement jack available. For a replacement, I recommend the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 4-Point Set # LC358590 if you have less than 20' between the front and rear leveling jacks. If you have 20' or more between them then you would want the 6-Point Set # LC675817. view full answer...
Yes, you can install the Roadmaster Diode Kit part # RM-154 on your 2017 Toyota Yaris so that you can operate the taillights of the vehicle while it's on the tow dolly. You'll need an additional 4-way though to activate these lights and the lights of your dolly. For that the # C55384 will install in line with your current 7-way wiring and will allow the 7-way to be active as well as the 4-way. view full answer...
If you are sure the power source is 6 volt the part # RVIL21 would not work for you. This is a 12 volt only light and we don't have any similar 6 volt options. I would double check though as I would be shocked if your motorhome was 6 volt. view full answer...
To replace the Lippert 300-1406 motor on your RV step assembly, you will just need the Replacement Motor # LC301695. This is a direct replacement for the existing motor on your steps and will work great.
I have attached a short video demonstration on the motor that you can also check out so you can get a closer look. view full answer...
For your 2020 Newmar Baystar Sport, we have the SumoSprings Rebel Custom Helper Springs # SSF-170-40-2.
These are designed to fit the following models:
2702
2813
2905
3008
3014
3112
3226
3315
These springs are blue in color and have a 3,000lb capacity at 50 percent compression. view full answer...
Yes, the 10" SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet # SN76FR are going to be the correct ones for your 2022 Newmar Bay Star Motorhome.
These SnapPads measure 13-1/4" long x 13-1/4" wide x 2-1/4" tall, will work with 10" octagonal shaped feet and is made in the USA. view full answer...
I recommend adding jounce springs to the rear of your vehicle to reduce body roll and rear sag, along with improving the overall handling of the vehicle. I also recommend installing the front steering stabilizer to help keep the vehicle straight and handling properly. Typically you would not need to also install front jounce springs unless you always have a lot of weight at the front of the vehicle for any reason; I also don't think you would need the rear stabilizer bar since the jounce... view full answer...
Yes it is possible to use the Roadmaster Dual Hitch Receiver Adapter part # RM-077-6 to flat tow your Gladiator and use the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes part # HLY84FR at the same time. Check out the video my buddy Rob did showing exactly what you want to do.
This does not included a pin and clip so if you do not have it pick up the Pin and Clip For Class III, IV and V Trailer Hitch Receivers part # PC3.
Since you are adding an additional connection point... view full answer...
For aluminum sensors to use with the TireMinder i10 TPMS for RVs # TM56FR the part # TM-2ALUM would be what you'd need for a pair of these sensors. These are needed for if your valve stems are aluminum like it sounds like they are. view full answer...
Great question.
To get the proper Item and fit I will need to know the size and shape of the feet on your system.
Are they round, square, rectangle. Do they have a lip or raised edge or are they complete flat and level?
The SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4 # SP54FR4 will work with jack feet that are round and have a 9 inch diameter and no lip or raised edge. view full answer...
The Round Cooking Rack # 324-000151 has a height of 2-9/16" and a diameter of 11-15/16". Check to make sure that'll work with your microwave and if so, you're good to go! view full answer...
You would have to use a stacked receiver with a large enough rise to accommodate the bike rack sitting higher than the Kar Kaddy # DM9713093. I recommend one like the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-316. This would allow you to haul a hitch mounted bike rack as well as the tow dolly. view full answer...
Hello Russ, we do have a rear sway bar for your 2020 Newmar Bay Star Sport 2813. I will tell you that the # RM-1139-149 that you were looking at is only for models with a 22,000 lb GVWR. Your 2813 model is the 20,500 GVWR model and for that you will need the following:
- Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter # RM-1139-145
I wanted to include an important note for the # RM-1139-145 sway bar. This will fit only if the shock mounts are parallel to the ground and have two holes.... view full answer...
The gasket is the portion of the gate valve that's allowing waste water to leak through and not actually the gate. Both companies are using a rubber gasket that will eventually fail so it really comes down to the other features of the gate valve to determine which you'd prefer. LaSalle Bristol's cable actuated gate valves don't allow you to replace the cable if there was ever an issue, whereas Valterra's do come apart and will allow you to replace components without having to replace the... view full answer...
The WeatherTech All-Vehicle Mat Auto Floor Liners - Front and Rear - Gray, part # 61-11AVMOTHSG, comes as a full set.
The front and rear driver's-side and passenger's-side liners are included, so you'll only need one to fully outfit your 2021 Newmar Bay Star Motorhome. view full answer...
Yes, you do. The wiring that comes with the Blue Ox Accessory Kit item # BX88308 only controls your towed vehicle's lights. You will need to add the Roadmaster Battery Charge Line Kit item # RM-156-25. view full answer...